Processing
Processing Capabilities
Slitting, decoiling, laser and waterjet cutting, CNC bending, punching and circle blanking — from coil and plate to components ready for your line.
8 mmMinimum slit width
±0.1 mmLaser tolerance
80 mmMax. plate cut
Six operations, one supply chain
| Operation | Range | Tolerance / notes |
|---|---|---|
| Slitting | width 8–1500 mm, 0.3–3 mm | burr ≤ 0.05 mm on request; kerf loss reported honestly (3–5% below 100 mm) |
| Decoiling / cut to length | length up to 6000 mm | camber within 1 mm per meter |
| Laser cutting | 0.3–20 mm | ±0.1 mm, edge quality per ISO 9013 |
| Waterjet cutting | 0.5–80 mm | ±0.2 mm, no heat-affected zone — preferred for duplex |
| CNC bending / punching | up to 4000 mm | bend angle ±0.5°, tooling per drawing |
| Circle blanking | Ø100–3000 mm | burr-free, nesting optimized to your blank size |
What to send us
- DXF or DWGfor cut parts — PDF is accepted but we will quote on redrawn profiles.
- Grade, thickness, and finish; if you are unsure, tell us the service conditions and we will recommend.
- Quantity and destination port— this determines packaging (crate, pallet, or bundle) and freight.
We quote cutting cost separately from material, so you can compare "buy sheet and cut locally" with "buy finished parts" using real numbers.
Need a quote for cut parts?
Send drawings, grade, quantity, and destination port — we reply within 24 hours.