Baja tahan karat
Pemotongan dan Fabrikasi Khusus
Pemotongan laser, waterjet, pembengkokan CNC, pelubangan dan pengelasan — dibuat sesuai gambar, dari lembaran 0,3 mm hingga pelat 80 mm.
0,3–80 mmKetebalan
≤ 3000 mmLebar
Spesifikasi yang tersedia
| Grade | Ketebalan | Lebar / diameter | Standar |
|---|---|---|---|
| 304 · 316L · 430 · 2205 | 0,3–80 mm | ≤ 3000 mm | ASTM A240 / EN 10088-2 |
Rentang yang ditampilkan adalah ketersediaan standar; ukuran non-standar dapat dibuat sesuai pesanan. Ketebalan bersifat nominal — toleransi dinilai berdasarkan ASTM A480 / EN 10088-2.
Aplikasi umum
- Braket, penyangga, dan pelindung mesin
- Nozel tangki, sekat, dan flensa
- Layar dekoratif dan panel berlubang
Pengiriman dan inspeksi
- Laser ±0,1 mm, waterjet ±0,2 mm, tanpa zona terpengaruh panas pada waterjet
- Deburring, persiapan tepi, dan passivasi atas permintaan
- Kami mengutip dari DXF/DWG Anda — kirimkan gambar bersama permintaan
Butuh penawaran atau dukungan teknis?
Kirimkan grade, ukuran, jumlah, dan pelabuhan tujuan — kami membalas dengan FOB / CIF dalam 24 jam.
Typical applications
Below is where this material actually ends up — the specific parts, not just the industry. Compare it with your own service conditions, or send us the environment and we will advise.
- Robotics — outer covers, mounting plates, guard brackets
- Automation — frame panels, rail mounting plates, fixture locating plates
- Kitchen and appliances — pierced panels, decorative parts
- Architecture — perforated screens, signage, shaped trims
Selection FAQ
- What tolerance does laser cutting hold?
- ±0.1 mm as standard; tighter on thin precision parts, looser on thick plate because of heat effects and kerf taper — assessed against your drawing.
- Why is stainless steel common for robot housings?
- It depends on the environment: cleanroom, food, medical and outdoor applications often use 304/316L because it withstands cleaning agents and moisture. For ordinary industrial settings, powder-coated cold rolled steel is more economical.
- Can you cut directly from drawings?
- Yes — DXF / DWG / PDF. Please state material, thickness, quantity and surface requirement when enquiring.
Not sure which grade fits? Use the grade selector