Baja tahan karat
Koil Baja Tahan Karat Canai Dingin
Koil canai dingin 2B dan BA dalam 304 / 316L / 430 / 201 — 0,3–3 mm, lebar hingga 1500 mm.
0,3–3 mmKetebalan
≤ 1500 mmLebar
Spesifikasi tersedia
| Grade | Ketebalan | Lebar / diameter | Standar |
|---|---|---|---|
| 304 · 316L · 430 · 201 | 0,3–3 mm | ≤ 1500 mm | ASTM A240 / EN 10088-2 |
Rentang yang ditampilkan adalah ketersediaan standar; ukuran non-standar dapat dibuat sesuai pesanan. Ketebalan bersifat nominal — toleransi dinilai berdasarkan ASTM A480 / EN 10088-2.
Aplikasi umum
- Peralatan rumah tangga dan perlengkapan dapur
- Lift dan trim interior
- Stamping dan deep drawing
Pengiriman dan inspeksi
- 2B: Ra 0,2–0,5 μm; BA: Ra 0,05–0,2 μm
- Skin-passed untuk kerataan, cocok untuk aplikasi film langsung
- Kelas permukaan dinilai berdasarkan ASTM A480 — sengketa warna dan goresan memiliki dasar
Butuh penawaran atau dukungan teknis?
Kirim grade, ukuran, jumlah dan pelabuhan tujuan — kami membalas dengan FOB / CIF dalam 24 jam.
Typical applications
Below is where this material actually ends up — the specific parts, not just the industry. Compare it with your own service conditions, or send us the environment and we will advise.
- Kitchen equipment — sinks, hob panels, range hood shells, commercial fridge liners
- Home appliances — washing machine drums and panels, microwave cavities, steriliser racks
- Architecture — elevator door frames and car panels, façade trims, balustrades, handles
- Food and pharma — filling line tables, tank liners, cleanroom wall panels
- Consumer goods — vacuum flasks, cookware, cutlery, bathroom fittings
Selection FAQ
- Should a kitchen sink be 304 or 316 stainless?
- 304 is enough for domestic use. For coastal areas, or where salt and detergent sit on the surface, 316L lowers the pitting risk.
- What is the difference between 2B and BA finish?
- 2B is cold rolled, annealed, pickled and skin-passed — a matte silver-grey. BA is bright annealed: more reflective, closer to mirror, slightly higher cost.
- Does stainless steel rust?
- "Stainless" is relative to carbon steel. Chlorides (salt, bleach) and scratched surfaces are the main triggers; in coastal or chemical environments upgrade 304 to 316L.
Not sure which grade fits? Use the grade selector