Baja tahan karat
Lembaran Tahan Karat Canai Panas
Lembaran canai panas No.1 dalam 304 / 316L — 3–12 mm, dipotong sesuai panjang hingga 6000 mm.
3–12 mmKetebalan
≤ 2000 mmLebar
Spesifikasi yang tersedia
| Grade | Ketebalan | Lebar / diameter | Standar |
|---|---|---|---|
| 304 · 316L | 3–12 mm | ≤ 2000 mm | ASTM A240 / EN 10088-2 |
Rentang yang ditampilkan adalah ketersediaan standar; ukuran non-standar dapat dibuat sesuai pesanan. Ketebalan bersifat nominal — toleransi dinilai berdasarkan ASTM A480 / EN 10088-2.
Aplikasi tipikal
- Fabrikasi struktural
- Cangkang tangki dan silo
- Platform dan jalur pejalan kaki
Pengiriman dan inspeksi
- Dianil dan diasam, siap untuk pengelasan
- Dipotong sesuai panjang dengan pemeriksaan kesikuan
- Tepi gilingan atau tepi dipangkas, pilihan Anda
Butuh penawaran atau dukungan teknis?
Kirimkan grade, ukuran, kuantitas, dan pelabuhan tujuan — kami membalas dengan FOB / CIF dalam 24 jam.
Typical applications
Below is where this material actually ends up — the specific parts, not just the industry. Compare it with your own service conditions, or send us the environment and we will advise.
- Tanks and vessels — atmospheric tank shells, bottom plates
- Structures — platforms, stairways, supports
- Environmental equipment — scrubber internals, dust collector housings
- Marine and port — hatch covers, mooring fittings
- Wear parts — chute liners (in heavier gauges)
Selection FAQ
- Is the hot rolled plate pickled?
- Standard supply is No.1 (hot rolled, annealed and pickled). Unpickled black coil must be specified separately.
- Can thick plate be decoiled and levelled?
- Yes, cut to length. Heavy gauges carry more internal stress after levelling — tell us the downstream process.
Not sure which grade fits? Use the grade selector